- Ankle Gaiter
- Velcro and dome closure
HUNTECH Ankle Gaiters have stood the test of time and what you see here is the exact Ankle Gaiter or Putty that made us so famous over the years.
Our construction / components and fabrics are the same because you won’t let us change them. The outer layer is made from a rock solid 400gsm thick fleece that has been finished with the flattest possible finishing pile and topped off with a DWR coating to help repel water. The inner layer is 260gsm tightly constructed cotton canvas that offers all of the support and stiffness to the Gaiter. They will not slip down and they offer superior abrasion and puncture resistance against potential sharp objects. The cotton canvas also has a DWR coating on both sides of the fabric for water repellency between the two layers. The added side woven loops add an extra tie point to lace under the heel of your boots. For optimum fitting your Ankle Gaiter should be snug to your leg. Secure the domes and velcro then feed the top compression strap through the buckle and cinch tight.
Recently viewed
You may also like
Welcome to Huntech Hut
The fire is going. The air is smokey and the water in the pot is almost ready for a cuppa. Bags of scroggin are being demolished while tales of cock-ups and epic encounters are shared around a wobbly table.
Visit Hut